The brand anti-mould spray from plid is made in Germany. The anti-mould spray from plid is a cleaner that can be used immediately to combat mould and bacteria efficiently. Thanks to its chlorine-free composition, cleaning with the anti-mould spray is associated with little odour. The cleaner can be used both indoors and outdoors and achieves excellent results in both cases.

Areas of application:
plid Anti-Mould Remover can be used indoors and outdoors in the home, bathroom, toilet, shower, on stairs and masonry, on marble, tiles, stone, wood, plastics, paints and on resistant textiles.

Anti-mould system:
Component A = plid anti-mould spray
Component B = plid anti-mould primer
Component C = plid anti-mould paint

Application:
Product is ready to use. Apply to the affected areas with a spray bottle or cloth and leave to act for approx. 2 hours. Remove the film with a brush or broom. Re-treat with water. For prevention, apply to the surfaces and do not rinse with water. Content is sufficient for 10 - 15 m2, depending on the absorbency of the substrate.

Drying time / reworking:
Can be recoated after a few hours in dry, warm air (DIN 50014, 23 °C, 50 % relative humidity). In cool, damp weather, allow correspondingly longer drying times.

These technical instructions are for your information only and are based on our tests and experience. They may be changed by us without prior notice to reflect the latest state of the art. A guarantee
cannot be given due to the various influences during application and processing. In case of doubt, please contact our technical application department.