Devi Thin-bed heating mat 140F0418 Manufacturer :Devi Designation :Thin-bed heating mat 100 W/m,2,5qm Type :140F0418 Design :Heating foil With support mat :yes Fixation of heating conductor :Glued Self-adhesive :yes Connected load :-250 W Output :100 W/m² Heat conductor load :11 W/m Number of cold conductors :1 Length of cold conductors :4000 mm Suitable for damp rooms :yes Suitable as open space heating :no Suitable as roof surface heating :no Surface area :2.5 m² Length :5000 mm Width :500 mm Thickness :3.5 mm With controller :no With room thermostat :no With floor temperature sensor :no Devi thin-bed heating mat 140F0418: more details Thin-bed heating mat with a connection cable and suitable sensor protection tube DN10 with red cap. The self-adhesive thin-bed heating mat with one connection cable is ready to install and has been specially developed for installation in levelling compound or flexible adhesive directly underneath the floor covering. Due to the low installation height of only 3.2 mm, it is ideal for renovating and modernising bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for retrofitting in rooms with many nooks and crannies and/or large rooms, as there is no need to lead back the second connection. The heating cable with additional protective braiding for the use of the FI protection circuit, is mounted on a plastic net. The length of the connection cables is 4.0 m. PTC resistor: 1 x 4m, 1.0 mm², voltage: 230 V, nominal limit temperature: 120°C, specific heat output: 100 W/m², linear load: 11W, insulation: PVDF / FEP, resistance tolerance: +10% / -5%, minimum laying temperature:5°C, Smallest bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval : EN 60335-2-96, Area 2.5 m², 0.5 x 5.0 m , EAN: 5703466203095.