Innovatek PCPS V2 12Volt pump with integrated AGB & threaded holes

of up to 1.60 metres, with a power consumption of between 3.7 and 4.0 watts depending on the operating mode. The PCPS starts with a low pressure after switching on and then gently increases it to the operating pressure within about 3 seconds. In this way, the service life is increased and the mechanics of the 12V pump are effectively protected, whereby the microprocessor included controls and monitors the pump. In addition to the pump itself, the compact housing also contains an expansion tank, which makes filling and maintaining the cooling system very easy. Additional sensors (e.g. a float switch) can optionally be installed in the lid of the expansion tank - please contact us directly. The user can access the pump control unit from under the easily removable electronics cover of the motor body (which can be removed without the use of tools or force by bending it slightly). Four programmes are available as standard, whereby the desired programme is set by means of a small 2-fold DIP switch and is read out when the 12V pump is started. To change the control, the two switches are set according to the following scheme: J1 off J2 off default 65 Hz = Mode: Normal J1 on J2 off silent 1 57 Hz = Mode: Silent 1 J1 off J2 on silent 2 50 Hz = Mode: Silent 2 J1 on J2 on power 78 Hz = Mode: Power The PCPS 12V pump can be operated directly from a 12 V DC power supply, although we can also offer other operating voltages (e.g. 24 V DC) on request. For mounting, the pump has four M4 threaded holes on the back side. The electrical connection is made via a modern 2-pin push-in cable terminal. Features: Very compact and space-saving Integrated expansion tank Very smooth running, therefore very quiet in operation High pump performance with adjustable modes (via DIP switch) Automatic and individual adjustment of the operating point to the cooling system.Type: synchronous centrifugal pump Tank volume: 62 ml Dimensions: 130 x 75 x 50 mm (LxWxH) Weight: approx. 265 g Thread: 2x 1/4 inch Feed height: 1.60 m Ambient temperature: 10 ??C to 60 ??C Supply voltage: 12 V DC (optionally 24 V) Power consumption: 3.7 to 4 W Electrical interface: 2-pin push-in cable terminal Included in delivery: circulating pump with integrated supply pump, integrated supply pump, integrated supply pump, integrated supply pump, integrated supply pump.Circulating pump with integrated reservoir (without connections!) Reservoir cover with mounted sealing ring Mounting plate Operating instructions / manual (German, English, French and Spanish).