No, that's no good. This is a Bluetooth receiver, not a transmitter.

Unfortunately not no, is only intended for one player.

I don't think it's possible, this article is more for HiFi.

Via tape. Phono is for the record player (much weaker signal).

Hey Thanks for the question. "Is it possible to play music from a mobile phone via BT on a Sonos Play:5 with this adapter?" I don't own a Sonos 5 myself Sonos 5 is in a class of its own in terms of sound. Since Bluetooth has an impact on the sound experience, WiFi was chosen. But whether Bluetooth or WiFi is not the question. Sonos has a 3.5 mm stereo audio input, the Logidec Bluetooth audio adapter has a 3.5 mm stereo audio output. Since the Logidec Bluetooth Audioadabter is only an interface that passes the signal on to a cinch connection, there are no connection problems. I have been using the Logidec Bluetooth Audio Adapter reliably for years. If you haven't bought the Sonos 5 yet, here's a tip: the Sonos One and Muse are Bluetooth compatible. Hope I could help you a little bit. Best regards

Cause found: The sound balance on the Macbook was set to a single speaker - so as not to disturb the cat, which has its bed in front of the other speaker :D

Hello Steareth-4 I don't even have the thing in use anymore, but have reactivated it now anyway, oh what am I nice again! :-) Test: Connect mobile phone and pair via BT. I disconnected the Logitech adapter from the power supply for 5 minutes, plugged it back in, and the phone connected again straight away. I am confident that it will work for longer than 5 minutes. Greetings, mikeych76

Only Bluetooth v3.0 codex are supported

This receiver only comes with a mains adapter. As an alternative, this model could be considered: TP-LINK HA100 (receiver) Connection to the car radio: via 3.5mm jack - cinch cable or via Bluetooth.

Mostly yes, but sometimes it is necessary to press the button. To pair another device, the current one must be unpaired and the new one actively paired, otherwise it does not work.

Is only stereo

Hello In Windows: Open Device Manager/ Bluetooth/ Select your Bluetooth device/ Right click on your device/ Properties/ Advanced. There you can give the receiver a name. Greetings

No, you can't. This is a receiver and NOT a transmitter. It is therefore only possible to receive audio signals from a mobile phone/tablet etc. and then route them to a stereo system, for example. The other way round, i.e. audio signals from the TV to Apple Airpods, is not possible.

Hello yes, I was supplied with a cable. On one side cinch or RCA audio to AUX audio.

I bought it for a friend, he's using it to send music from phone to his receiver (can't remember the type). It works for him

Hello Jens! Your eyes are not deceiving you! The adapter is always in "stand by" mode, which means that the blue light is always on. Best regards superhallo50

I'm not sure I understand your question, but for your information, this device is NOT a speaker. It is only a Bluetooth receiver that can be connected to a speaker via the audio cable. I assume you know that. If the speakers you are using have two audio-in ports, you can connect both and either the speakers will automatically switch between your PC and the receiver or you will have to do this manually. If your speaker only has one plug, you could buy a splitter so you can connect both at the same time. If you also want to connect your PC via Bluetooth, it's even easier. Just connect and if you want to listen to music with your smartphone, just connect your smartphone.

Yes, there are 3 short, deep beeps. Unfortunately, this comes directly from the adapter and cannot be controlled from the mobile phone. As long as the speakers or the amplifier is not turned up to the limit, however, this is not a problem.

Hello, you need a plug-in power supply with 5V output voltage and at least 0.75W output power. The connection is made via a 4mm hollow plug, the positive pole is inside. Article 21604687 should fit.

50x50x24mm (LxWxH), the cinch sockets on the back protrude 5mm.

### Compatibility and use The Logitech Bluetooth Audio Adapter (receiver) can be used to receive and transmit the signal for the Denon DN-500CB device, provided that the Denon device has a corresponding audio input socket (RCA or 3.5 mm). The adapter device is compatible with most loudspeakers, home stereo systems and AV receivers that have these inputs. ### Changing the Bluetooth display name Unfortunately, the Bluetooth display name of the Logitech Bluetooth Audio Adapter cannot be changed. The manufacturer's instructions and documentation do not mention the possibility of changing the display name.

If the power supply unit is connected correctly and it is working, the small blue LED should already light up light blue without pressing the button. If not, the device or power supply unit is faulty.

Unfortunately, we do not have the power cable in our range. In such a case, you would have to contact the manufacturer directly: https://support.logi.com/hc/de-ch

Many thanks for the tip!

I enjoy the Bluetooth receiver because it easily connects my LG TV with a 500 watt Logitech 5.1 sound system and also with a 3000 watt DJ system. It can even be controlled individually. I am VERY satisfied.