EUR167,95 EUR167,95/1TB
Samsung 980 Pro with Heatsink
1000 GB, M.2 2280
Questions about Samsung 980 Pro with Heatsink
What would you like to know?
0 questions and answers
Helpful answer
If you don't have any screws, this set can help you: Delock mounting set 31 pieces for M.2 SSD / module
The advantage is that you already have a cooler installed and the disadvantage is that you cannot use it together with a mainboard onboard cooler. In my experience, the existing coolers from the mainboard are better, so I would only go for the heatsink version if the board has no cooler
You mean an enclosure to use as an external SSD? That makes no sense with this SSD. Look for an external SSD right away, e.g. at https://ssd-tester.de/externe_festplatten_test.php.
The heatsink housing is attached via side screws and can be removed without any problems. However, the copper label that is installed on the normal 980 Pro and is used for heat dissipation is missing. The SSD should therefore not be used without any heat dissipation, as it already gets very hot with the large heatsink.
Hello I find the MaxTBW absolutely unimportant because, as a computer scientist of many years, I have never had a worn-out SSD. In addition, the 600TBW can be seen in the information at Digitec below. Kind regards Roger
Helpful answer
Cloning would be possible with freeware tools, there is for example Macrium Reflect Free or the programme HDClone also as a free version, but I would not recommend this SSD, not even the model 990, both have various problems and they are also not good SSDs, there are better ones, even some that last longer. The 990 in particular caused a lot of fuss in the first weeks of 2023 because it lost its health status very quickly, a new firmware stops this, but does not bring back the lost health. My recommendation for a very fast and very good SSD: 1. Seagate FireCuda 530 2. solidigm P44 Pro 3. WD Black SN850X These SSDs are all better than a 980 Pro.
Unfortunately, the SSD does not fit in your motherboard.
I can't tell you I put it in my ps5
The Community is made for requests concerning the ownership and use of products. In addition, prices are based on supply and demand, suppliers and availability of goods. For any other questions or complaints regarding this, please contact customer service :)
As far as I know, you can do this with Samsung Magician.
At Digitec, of course... Fast, cheapest and uncomplicated
Helpful answer
Yes...the HS goes away. But I would think twice about it, in the ICY the 980 (tested with the non-HS variant) already gets quite warm when connected to Gen3.
Hey Darius, I have the SSD in the PS5, so I don't need that!
If it has probably changed, you must inform dicitec that they should change it - you may then also get CHF 10 back...
Helpful answer
The following video explains all the steps required for installation in the PS5 in great detail: https://youtu.be/kHvLW4iCFOg
I have installed my SSD in the PS5 and have no answer to this question! Muesch haut luege!
Thank you very much for pointing this out. A correction request has just been sent. It is a matter of 7000 MB/s.
Unfortunately, we cannot currently offer this separately.
24 of 24 questions