Plid Bathroom & kitchen paint white 5L for approx. 30m² / bathroom paint damp-proof paint interior paint

The wet room paint can be used for both new and renovation coatings on surfaces susceptible to mould and fungi, damp rooms and in private living areas. The bathroom & kitchen paint is also characterised by its high hiding power and its low odour and low splash. The damp room paint can be applied using tools from prinzwork, for example. This set is the right choice if you want to save money.

Intended use:
Very suitable for renovating and repainting interior walls in damp rooms, also for use in rooms with inadequate ventilation. Suitable substrates are interior plaster, concrete, sand-lime brick, woodchip wallpaper and embossed paper wallpaper, plasterboard, hardboard, chipboard or rigid foam.

COATING STRUCTURE AND APPLICATION TECHNIQUE:
All substrates must be clean, dry, free of oil and grease and sound. Completely remove any existing fungal and mould infestation by brushing, scraping or washing off, if necessary with a fungicidal washing solution. Remove unsound and flaking old coatings. Wash off distemper and chalking surfaces completely. Prime critical and highly absorbent substrates with plaster primer or deep penetrating primer (solvent-free). Stir Bathroom and Kitchen Paint well and spread evenly. For the primer coat, dilute Bath and Kitchen Paint with up to 10 % water. After approx. 4 - 6 hours, apply 1 to 2 undiluted top coats.

Yield:
approx. 6 m2/ltr., with one coat, depending on the absorbency of the substrate
Density: approx. 1.5 g/cm³
Thinner for rolling, painting Water
Tools
Paint roller, flat brush
Cleaning the tools:
Immediately after use with soap and water
Storage:
Cool, but frost-free

Drying time: (at 20°C, 65% relative humidity)
Dust-dry/solid to the touch: after approx. 2 - 3 hours
Recoatable: after approx. 4 - 6 hours
completely dry: ---
Lower temperatures and higher humidity extend the drying time!

These technical instructions are for your information only and are based on our tests and experience. They may be changed by us without prior notice to reflect the latest state of the art. No guarantee can be given due to the various influences during application and processing. In case of doubt, please contact our technical application department.