Victron Energy Inverter

electrical appliances or motors. The Phoenix 12/375VE.Direct is suitable for connection to 12 V DC batteries and converts them into a pure 230 V sine wave AC voltage. With an efficiency of 90%, it is one of the best devices in its class. Via the VE.Direct connection, the device can be connected to a computer or smartphone and various parameters can be configured. Configure parameters: The inverter is ready to operate with factory settings and can be configured using a computer (VE.Direct to USB interface cable required), Apple and Android smartphones, tablets or other devices (VE.Direct Bluetooth Smart Dongle required). Among other things, the output AC voltage and frequency, the alarm threshold and low battery shutdown voltage, and the voltage for detecting "battery charged" status. Also configurable are the settings for stop ECO mode and start power. ECO mode:
Set the front switch to ECO mode to reduce power consumption in the unloaded state. The inverter will then switch off automatically when it detects that no loads are connected. It then turns on briefly every 2.5 seconds to check whether a load is present. If the output power exceeds the set limit value, the inverter resumes operation. These parameters can also be configured. Remote controlled on/off switch: A remote controlled on/off switch can be connected to the two-pole connector. Or the left contact of the plug can be changed to the positive pole of the battery: This is useful in automotive applications. Wire it to the ignition contact.