Wellpower LIPO BATTERY ULTIMA 3300 MAH / 22.2 VOLT 6S 35/70C CH5/8 XT-60

Depending on the type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make our "Wellpower" lipos the 1st choice for the ambitious model builder. Balancer plug-in system "XH". Version "V2" is supplied as standard with a Liposafe specially made according to battery size (from 1000mAh). For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note the temperature development!) For price-conscious model builders, we offer the ECO series, with a slightly lower nominal load capacity and without Liposafe, but with the familiar quality features at an unbeatable price. Splitpacks have two balancers and 4 main power connections. ULTIMA" version with real 35C or 60C continuous load and peak between 70C and 90C (1sec.) or 120C (max.0,5sec.) for uncompromising applications like competition. "CHECK" version with standard built-in LED voltage indicator for quick test of battery charge status: Figures in brackets apply only to short-term load! (max. 5 seconds)<br>Charging currents: "CHx" specifications indicate the maximum permissible charging current. For CH2, for example, 2 times the nominal capacity (i.e. for a 2.0Ah battery max.4A) , CH6 6 times the value etc.<br><br>Tip: <br><ul><li>The max. continuous discharge current is only recommended with active temperature monitoring!Preheating cold batteries increases their performance and service life.gt;<li>Never let batteries get hotter than 60°C</li><li>Recommended storage voltage 3.70... 3.80 V / cell</li><li>Protect against short-circuit, mechanical damage, overheating, deep discharge, etc.Protect against short-circuit, mechanical damage, overheating, deep discharge and overcharging</li><li>Only charge with a suitable lipo charger on a fireproof base </li><li>Do not continue to use damaged cells !Never charge or discharge unattended !</li></ul><br><br> 3533.